A
24
Bluetooth Capability (bE 1)
Press the Menu/Enter Button. This display
is used to turn the bluetooth capabilities
of the system on (1) or off (0). The sys-
tem should always be on regardless of it’s
usage. If a connection to system cannot be
made, verify this setting is turned on.
Bluetooth Password (btPP)
Press the Menu/Enter Button. The next
display shown is the Bluetooth Password
(btPP). When shown, this number will flash
between “btPP” and a four digit code. The
code is used for accessing the Legacy
View app. The default is “1234” and unless
it has been changed, no password will be
needed to access the control valve with
Legacy View.
Display Off (do 0)
Press the Menu/Enter button. The next
display shown is the Display Off feature
(d o 0). This is defaulted to off (0) but can
be turned on by pressing the Set/Change
button twice to turn it on (1)
Activating this feature will turn the display
off when not in use. This does not shut the
system off, just what is shown to the user
Chandler Systems
24
To Next Page
Loading...