19
4
5
"Cone" side of wheel against leg
1” Hitch Pin
Qty. 1
Wheel Spacer
Qty: 2
Axle Washer
Qty: 1
Turn leg assembly upside down.
Insert axle rod through wheel, wheel spacer, legs, other wheel spacer and wheel. Be sure to face “cone” side of
wheel against leg. Attach with (1) axle washer and hitch pin.
Insert leg extenders into right legs. Then turn cart upright and press leg extender into place with body weight.
Leg Extender
Wheel
Wheel Spacer
Wheel Spacer
Hitch Pin
Place back rail to the cart.
Tighten the pre-installed screws to the cart.
Axle Washer
Back Rail
To Next Page
Loading...
