To Next PageTo Next PageWhat to do if timer does not work on Char-Broil 463271310?
Replace the batteries if the timer on your Char-Broil gas grill does not work (Green light does not flash). Ensure the batteries are installed correctly. Push the knob in to start the clean cycle. (Green LED should begin to flash).
General| Brand | Char-Broil |
|---|---|
| Model | 463271310 |
| Category | Gas grill |
| Fuel Type | Propane |
| Ignition System | Electronic Ignition |
| Material | Steel |
Health warnings regarding chemicals in product, including cancer and reproductive harm.
Guidance on LP cylinder removal, transport, storage, filling, and safety precautions.
Procedures for exchanging LP cylinders and performing leak tests for safety.
Step-by-step instructions for connecting the gas regulator to the LP cylinder safely.
Detailed steps for performing leak tests on gas valves, hoses, and the regulator.
Essential safety guidelines and practical tips for operating the grill safely.
Instructions on how to safely light the grill burners using the electronic ignitor.
Procedures for checking burner flames, ignitor, valves, and hoses for proper function.
Methods for turning off the grill, including manual and Auto-Clean™ procedures.
Instructions for cleaning plastic, porcelain, painted, and stainless steel grill surfaces.
Guidelines for cleaning, storing, and covering the grill when not in use.
Step-by-step guide for cleaning burner tubes, ports, and reattaching components.
Details on warranty coverage, duration, exclusions, and limitations.
A detailed list of all parts with their corresponding keys and quantities for assembly and replacement.
An illustrated diagram showing the location and labeling of all grill components.
Instructions for attaching casters, side panels, and the lower back panel to the grill cart.
Steps for lowering the grill head onto the cart and securing it properly.
Securing the upper back panel and installing the temperature gauge onto the control panel.
Instructions for attaching side shelves and the Auto Clean valve bracket to the grill.
Steps to attach the sideburner shelf and the front brace to the grill assembly.
Securing the front brace and assembling the sideburner bezel and control knob.
Steps to insert the sideburner into the shelf and attach the sideburner lid.
Attaching grease tray rails, heat shield, and tank wire to the grill's frame.
Procedure for inserting and securing the tank exclusion wire shelf within the grill cart.
Connecting wires to the electronic ignition module and installing the AA battery.
Attaching the grill doors and inserting the flame tamers into their designated slots.
Placing cooking grates and warming rack, and installing the battery box cover.
Sliding the grease tray into place and securing the LP cylinder with regulator.
Immediate actions and solutions for gas leaks, fires, and other emergency situations.
Diagnosing and resolving problems with burners not lighting using ignitor or match.
Resolving issues related to gas flow, flame behavior, and burner performance.
Troubleshooting common problems with the Auto-Clean™ timer and LED indicators.
Detailed steps for diagnosing and fixing no spark, weak spark, or arcing issues with the electronic ignition.
