EasyManua.ls Logo

Char-Broil 463650413 - Assembly: LP Tank Setup; LP Tank Installation and Securing

Char-Broil 463650413
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
11
LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank. Fill and leak-check before
attaching to grill and regulator. See Use and Care section to correctly Leak Test and perform the Burner Flame Check.
Place LP tank into hole in bottom shelf with tank collar opening facing to front of grill as shown. Finger tighten tank retainer screw
to hold LP tank securely in place.
LP Cylinder
(not included)
CAUTION
Failure to install tank correctly may
allow gas hose to be damaged in
operation, resulting in the risk of fire.
Always keep LP cylinders in
upright position during use,
transport, and storage.
Tank Retainer Screw
Cylinder screw at rear of cart
LP Cylinder
(not included)
LP Tank

Related product manuals