21
9
Insert ends of Warming Rack pivot wire into holes in sides of grill lid. Insert ends of Warming Rack leg wire
into holes in sides of firebox. NOTE: Pivot and leg wires, running side-to-side, should be under wires running
front-to-back. If pivot and leg wires are on top, Warming Rack is installed upside-down.
10
Hang grease cup clip from bottom of firebox and place grease cup into grease clip.
CAUTION
Failure to install grease cup clip and
grease cup will cause hot grease to
drip from bottom of grill with risk of
fire or property damage.
Grease Cup Clip
Grease Cup
Swing Away
Pivot Wire
Leg Wire
To Next Page