Charles RT115 Tier 3 - Page 120

RT115 Tier 3- SAW ATTACHMENT
SETUP
120 RT115 Tier 3 - SAW ATTACHMENT
SETUP
Normal Use
1. Fasten and adjust seat belt.
2. Start tractor. See TRACTOR start-up procedures.
3. Drive to starting point. Move in line with planned trench. See
TRACTOR for operating procedures.
4. Engage parking brake and verify parking brake indicator is
on.
5. Move gearbox control to 1 (low).
6. Tilt steering wheel column up.
7. Swivel seat to the work position.
8. Engage axle lock.
9. Lower saw to just above ground.
10. Lower stabilizers until distance from bottom of skid shoe to
bottom of saw bits equals desired trench depth.
11. Check that saw is in line with planned trench and that tires
are pointing straight ahead.
Normal Use
1. Fasten and adjust seat belt.
2. Start tractor. See TRACTOR start-up procedures.
3. Drive to starting point. Move in line with planned trench. See
TRACTOR for operating procedures.
4. Engage parking brake and verify parking brake indicator is
on.
5. Move gearbox control to 1 (low).
6. Tilt steering wheel column up.
7. Swivel seat to the work position.
8. Engage axle lock.
9. Lower saw to just above ground.
10. Lower stabilizers until distance from bottom of skid shoe to
bottom of saw bits equals desired trench depth.
11. Check that saw is in line with planned trench and that tires
are pointing straight ahead.