EasyManua.ls Logo

Charles RT115 Tier 3 - APPROVED COOLANT

Default Icon
252 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RT115 Tier 3- SERVICE
APPROVED COOLANT
150 RT115 Tier 3 - SERVICE
APPROVED COOLANT
APPROVED COOLANT
This unit was filled with John Deere Cool-Gard coolant before
shipment from factory. Add only John Deere Cool-Gard (p/n 255-
006) or any fully-formulated, ethylene glycol based, low-silicate,
heavy-duty diesel engine coolant meeting ASTM specification
D5345 (prediluted) or D4985 (concentrate) and containing
supplemental coolant additives (SCAs) meeting John Deere
specification JDM H24A2.
NOTICE: Do not use water or high-silicate automotive-type
coolant. This will lead to engine damage or premature engine
failure.
NOTICE: Do not mix heavy-duty diesel engine coolant and
automotive-type coolant. This will lead coolant breakdown and
engine damage.
Incorrect procedures could
result in death, injury, or property damage. Learn
to use equipment correctly.
NOTICES:
Unless otherwise instructed, all service should be
performed with engine off.
Refer to engine manufacturer’s manual for engine
maintenance instructions.
Before servicing equipment, lower unstowed attachments
to ground
APPROVED COOLANT
This unit was filled with John Deere Cool-Gard coolant before
shipment from factory. Add only John Deere Cool-Gard (p/n 255-
006) or any fully-formulated, ethylene glycol based, low-silicate,
heavy-duty diesel engine coolant meeting ASTM specification
D5345 (prediluted) or D4985 (concentrate) and containing
supplemental coolant additives (SCAs) meeting John Deere
specification JDM H24A2.
NOTICE: Do not use water or high-silicate automotive-type
coolant. This will lead to engine damage or premature engine
failure.
NOTICE: Do not mix heavy-duty diesel engine coolant and
automotive-type coolant. This will lead coolant breakdown and
engine damage.
Incorrect procedures could
result in death, injury, or property damage. Learn
to use equipment correctly.
NOTICES:
Unless otherwise instructed, all service should be
performed with engine off.
Refer to engine manufacturer’s manual for engine
maintenance instructions.
Before servicing equipment, lower unstowed attachments
to ground

Table of Contents