Charles RT115 Tier 3 - Disassemble Joints; Optional Equipment

RT115 Tier 3- DRILLING ATTACHMENT
DISASSEMBLE JOINTS
148 RT115 Tier 3 - DRILLING ATTACHMENT
DISASSEMBLE JOINTS
DISASSEMBLE JOINTS
1. Press tab through hole in
female side of joint using
special tool or screwdriver.
2. Pull rods apart.
OPTIONAL EQUIPMENT
Drill Rod
Bent or damaged drill rod might break when being pushed.
Replacement drill rod and connectors are available through your
Ditch Witch dealer.
Bits and Backreamers
Bits and backreamers are available in a variety of sizes and types
to match jobsite needs. Contact your Ditch Witch dealer for more
information.
DISASSEMBLE JOINTS
1. Press tab through hole in
female side of joint using
special tool or screwdriver.
2. Pull rods apart.
OPTIONAL EQUIPMENT
Drill Rod
Bent or damaged drill rod might break when being pushed.
Replacement drill rod and connectors are available through your
Ditch Witch dealer.
Bits and Backreamers
Bits and backreamers are available in a variety of sizes and types
to match jobsite needs. Contact your Ditch Witch dealer for more
information.