Charles RT115 Tier 3 - Page 211

RT115 Tier 3 - SERVICE 211
AS NEEDED
RT115 Tier 3 - SERVICE 211
AS NEEDED
Check Saw Segment Bolts
Check segment bolts after first 10 hours of operation and then as
needed. Torque to 700 ft•lb (950 N•m).
Hard Surface Saw Segments and Wear Bars
Hard surface saw segments and wear bars before hard surfacing
wears away to protect the life of the part.
Backhoe
Replace Pins and Bushings
Replace pins and bushings when worn or damaged.
t03om008h.eps
1
2
Check Saw Segment Bolts
Check segment bolts after first 10 hours of operation and then as
needed. Torque to 700 ft•lb (950 N•m).
Hard Surface Saw Segments and Wear Bars
Hard surface saw segments and wear bars before hard surfacing
wears away to protect the life of the part.
Backhoe
Replace Pins and Bushings
Replace pins and bushings when worn or damaged.
t03om008h.eps
1
2