Charles RT115 Tier 3 - Page 222

RT115 Tier 3- SPECIFICATIONS
RT115 TIER 3 TRACTOR
222 RT115 Tier 3 - SPECIFICATIONS
RT115 TIER 3 TRACTOR
Operation U.S. Metric
Forward speeds
Low/Low 0.6 mph 0.9 km/h
Low/High 1.3 mph 2.0 km/h
High/Low 4.4 mph 7.0 km/h
High/High 9.4 mph 15.1 km/h
Reverse speeds
Low/Low 0.3 mph 0.5 km/h
Low/High 0.7 mph 1.2 km/h
High/Low 2.9 mph 4.7 km/h
High/High 6.2 mph 9.9 km/h
Vehicle clearance circle (SAE) wall to wall with backfill blade
Front steer only 31 ft 9 m
Coordinated steer 21 ft 6 m
Ground clearance 14 in 355 mm
Basic unit weight 7980 lb 3620 kg
Maximum allowable tractor weight
With RT115 ROPS 18,100 lb 8210 kg
With HT115 ROPS 22,800 lb 10 342 kg
Front counterweight 2100 lb 950 kg
Backfill Blade U.S. Metric
Blade width 80 in 2.0 m
Blade height 17 in 430 mm
Lift height above ground 21 in 530 mm
Blade drop below ground 11 in 280 mm
Maximum swing angle (left/right) 30° 30°
Tilt angle (up/down) 24° 24°
Operation U.S. Metric
Forward speeds
Low/Low 0.6 mph 0.9 km/h
Low/High 1.3 mph 2.0 km/h
High/Low 4.4 mph 7.0 km/h
High/High 9.4 mph 15.1 km/h
Reverse speeds
Low/Low 0.3 mph 0.5 km/h
Low/High 0.7 mph 1.2 km/h
High/Low 2.9 mph 4.7 km/h
High/High 6.2 mph 9.9 km/h
Vehicle clearance circle (SAE) wall to wall with backfill blade
Front steer only 31 ft 9 m
Coordinated steer 21 ft 6 m
Ground clearance 14 in 355 mm
Basic unit weight 7980 lb 3620 kg
Maximum allowable tractor weight
With RT115 ROPS 18,100 lb 8210 kg
With HT115 ROPS 22,800 lb 10 342 kg
Front counterweight 2100 lb 950 kg
Backfill Blade U.S. Metric
Blade width 80 in 2.0 m
Blade height 17 in 430 mm
Lift height above ground 21 in 530 mm
Blade drop below ground 11 in 280 mm
Maximum swing angle (left/right) 30° 30°
Tilt angle (up/down) 24° 24°