Charles RT115 Tier 3 - Page 86

RT115 Tier 3- TRENCHER ATTACHMENT
SETUP
86 RT115 Tier 3 - TRENCHER ATTACHMENT
SETUP
1. Fasten and adjust seat belt.
2. Start tractor. See TRACTOR start-up procedures.
3. Drive to starting point. Move in line with planned trench. See
TRACTOR for operating procedures.
4. Engage parking brake and verify parking brake indicator is
on.
5. Move gearbox control to 1 (low).
6. Select low hydraulic motor speed.
7. Lower backfill blade.
8. Tilt steering wheel column up.
9. Swivel seat to the work position.
10. Engage axle lock.
11. Lower boom to just above ground.
12. Check that attachment speed/direction control is in neutral.
13. Check that boom is in line with planned trench.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
1. Fasten and adjust seat belt.
2. Start tractor. See TRACTOR start-up procedures.
3. Drive to starting point. Move in line with planned trench. See
TRACTOR for operating procedures.
4. Engage parking brake and verify parking brake indicator is
on.
5. Move gearbox control to 1 (low).
6. Select low hydraulic motor speed.
7. Lower backfill blade.
8. Tilt steering wheel column up.
9. Swivel seat to the work position.
10. Engage axle lock.
11. Lower boom to just above ground.
12. Check that attachment speed/direction control is in neutral.
13. Check that boom is in line with planned trench.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.