All Rights Reserved
8. Boot the Machine
Open the machine power switch, wait for the machine to self check and loading the
operating system, when machine start complete, display screen as shown below.
Figure.8-1
(1) Alarm：Used for viewing current alarm and cause;
(2) Run: Used for loading working files and control the machine running etc.;
(3) Test: Used for testing each function module respectively;
(4) Set: Used for setting various parameters that machine work required;
(5) Log: Used for viewing the record information;
(6) System Log: Used for viewing the log of system;
(7) Files: Used for managing and convert work file.
To Next Page
Loading...
Need help?
General
