危险废弃物
3. Disassemble and Install the Battery Cabin
03 Other Aspects
① Disassemble
1. Unlock the knobs on both sides of the fuselage and rotate them to 90°to the shallow
slot ①;
2. Pull the switch ② on the slider and toggle the lock assembly upwards while holding the
chute ③ ;
3. Pull the lower sides of the Pressure Plat④ and pull down to deform the Pressure Plate
④ , and make the buckle come off the rear bracket;
4. Pull the battery ring-pull ⑤ to take out the battery cabin slowly.
To Next Page
Loading...
