危险废弃物
3. Motor Maintenance
04 Maintenance & Caution
1. Do not touch the rotating propellers
2. Do not unlock the thrusters for more than 30 seconds in the air to
avoid overheating
3. When the propellers wear out seriously, there may be a decline in
machine power. It is recommended to replace the new propellers;
please contact Chasing after-sales for guidance to replace the
propellers.
4. After using the ROV in the salt water, please put it in fresh water for
about 1 hour and turn it on, let the drone run for 10 minutes to
discharge the salt, and dry out the water after cleaning with a towel.
※ It is recommended to use the machine maintenance function (CHASING GO1
App: Click the upper right corner →Help-Machine maintenance-ROV-To
maintain)
To Next Page
Loading...
