危险废弃物
4. Other advices
04 Maintenance & Caution
1. Check the cover of the peripheral interface and Micro SD card interface is securely in
place before use. Check whether the O-ring on the tether connector/battery socket/SD
card socket pre-dive, and make a replacement when it is missed or damaged.
2. Check the Connector socket and tether pre-dive, keep dry and clean. Salt and moisture
may cause corrosion of the connector. Be sure to wash the socket with fresh water if the
interface has water stains, and make the connectors dry after cleaning.
3. When not in use, please do not expose the drone and accessories to sunlight. Store it in
a cool place or in a special box. The remote control is not waterproof. Please avoid being
water splashed. It cannot be washed with water, please clean it with a towel.
To Previous Page
Loading...
