19000 / 29000 Appliances Hardware
Quantum Force 19000 and 29000 Appliances Getting Started Guide|56
To monitor the PSUs in the CLI:
1. Connect to the command line on the appliance.
2. Log in to Gaia Clish.
3. Run:
show sysenv ps
Example output from a 29100 appliance:
Hardware Information
Name Value Unit Type Status Maximum Minimum
Power Supply #1 Up Up/Down Power 0 Up Down
Power Supply #2 Up Up/Down Power 0 Up Down
Where:
Column Description
Name
Power Supply #1 - The PSU in the top PSU slot.
Power Supply #2 - The PSU in the bottom PSU slot.
Value
Up - The PSU slot contains a PSU and is up.
Down - The PSU slot contains a PSU but it is not connected to a power
source.
Empty - There is nothing in the PSU slot.
Unit
Up/Down - PSUs are either Up or Down.
Type
Power - The sensor type is "power supply".
Status
0 - No problems found.
1 - Error.
Maximum
Minimum
The maximum and minimum thresholds.
PSUs are only measured as Up or Down.
To Next Page
Loading...
