Configuring Appliances
Quantum Force 19000 and 29000 Appliances Getting Started Guide|37
Configuring Appliances
Initial Configuration
These are the initial configuration methods you can use:
n
Interactive (this is the recommended method) - Select one of these:
l
Scan the QR code located on the
"Service tag" on page45
and follow the
instructions that appear.
l
Scan the QR code on the "Welcome" page that came in the appliance box and
follow the instructions that appear.
n
Legacy - Connect the appliance according to the instructions in the
19000 and 29000
Appliances Quick Start Guide
.
In the section
Set Up Your Appliance
, follow
Option #2
.
Then, configure the appliance with the Gaia First Time Configuration Wizard.
1. See the
Installation and Upgrade Guide
for your version.
2. In the section
Installing a Security Gateway
>
Configuring Gaia for the First Time
,
follow the instructions for the First Time Configuration Wizard.
Important - For the Maestro initial configuration, see the
Quantum Maestro Getting
Started Guide
.
To Next Page
Loading...
