Using the First Time Configuration Wizard
Quantum Spark 1530 / 1550 Appliance R80.20.XX Getting Started Guide|28
Appliance Registration
The appliance can connect to the Check Point User Center with its credentials to pull the license
information and activate the appliance.
If you have Internet connectivity configured:
Click Activate License.
You are notified that you successfully activated the appliance and you are shown the status of your license
for each Software Blade.
If you are working offline while configuring the appliance:
1. From a computer with authorized access to the Check Point User Center, follow
one
of these
procedures:
n
Use your User Center account
a.
Log in to your User Center account.
b.
Select the specified container of your appliance.
c. From the Product Information tab, click License > Activate.
This message appears: "
Licenses were generated successfully
".
d. Click Get Activation File and save the file locally.
n
Register your appliance
a. Go to: https://smbregistration.checkpoint.com
b. Enter your appliance details and click Activate.
This message appears: "
Licenses were generated successfully
".
c. Click Get Activation File and save the file locally.
2. In the Appliance Activation page of the First Time Configuration Wizard, click Offline.
The Import from File window opens
3.
Browse to the activation file you downloaded and click Import. The activation process starts.
You are notified that you successfully activated the appliance and you are shown the status of your
license for each blade.
If there is a proxy between your appliance and the Internet, you must configure the proxy details before
you can activate your license.
To configure the proxy details:
1. Click Set proxy.
2. Select Use proxy server and enter the proxy server Address and Port.
To Next Page
Loading...
