MNL-ISCAN3, REVB INSTALLATION & OPERATION MANUAL Page 3 of 25
DCO #12743 For Technical Support Call: +1.866.821.5504 Schedule Document
IMPORTANT SAFETY INFORMATION
Read All Instructions before Using Equipment
The instructions provided in this manual have been prepared to serve as a general guide. It is intended for use by
qualified personnel with knowledge of equipment of this type. It is not intended to cover all possible variations in
equipment or to provide for specific operating problems which may arise.
You are responsible for adhering to all warnings or cautions provided in this Manual.
In addition to any general safety measures provided in this Manual, you must comply with all current national, state,
local and company safety regulations at all times.
Safety Symbols used in this manual comply with ISO 3864.
THESE SYMBOLS ARE USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY HAZARDS.
OBEY ALL SAFETY MESSAGES THAT FOLLOW THESE SYMBOLS TO AVOID POSSIBLE INJURY OR DEATH.
Indicates a hazard with a high level of risk which, if not avoided will result in death or
serious injury.
Indicates a hazard with a medium level of risk which, if not avoided could result in
death or serious injury.
Indicates a hazard with a low level of risk which, if not avoided will result in minor or
moderate injury.
To Next Page
Loading...