MNL-ISCAN3, REVB INSTALLATION & OPERATION MANUAL Page 6 of 25
DCO #12743 For Technical Support Call: +1.866.821.5504 Schedule Document
Product Features
The iScan3 flame scanner is designed to detect flame from fossil fuels such as natural gas, refinery gas, waste gas, fuel oils,
biomass and coals. The iScan3 consists of an integrated viewing head and signal processor. No secondary signal processor or
amplifier is required.
Ease of Installation
QUICK-CONNECT BURNER MOUNT:
The simple cam-and-groove mechanism allows for quick mounting, release, and rotation of the scanner.
QUICK CONNECT I/O CABLE:
The iScan3 input connector allows quick disconnect even in hazardous areas
To Next Page
Loading...