INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
pollen etc. in it.
A/C switch
This switch is used to turn on and turn off
A/C compressor.
To turn on air conditioner, start engine,
turn blower switch to an appropriate wind
speed, and then turn on A/C switch. After
air conditioner is turned on, the indicator
light will light. To turn off the air
conditioner, press A/C switch button once
again. When blower switch is at the
“OFF” (turned off) position, A/C
compressor will not work.
Strongest refrigeration
In torrid weather, when the vehicle is
exposed under sun for long, open windows
for a short time to let hot air inside the
vehicle rapidly flow out.
A/C switch: ON
Internal/external recirculation switch:
internal recirculation ( working
indicator light lights)
Airflow distributing switch: ( )
Cold air/warm air adjusting switch: turn it
counter-clockwise to bottom (blue).
Blower switch: maximum revolution
Normal refrigeration
Normal refrigeration during long-distance
traveling and quick traveling.
A/C Switch: ON
Internal/external recirculation switch:
external recirculation ( working
indicator light goes out)
Airflow distributing switch: ( ) or
( )
Temperature control switch: blue
Blower switch: random
When the vehicle is
climbing a long slope or in traffic
jam, turning on A/C may make
engine overheat. Observe water
temperature gauge, if the engine
overheats, please turn off A/C to
reduce load of the engine.
To Next Page
Loading...
