INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
Head and foot
This mode is used in transition stage when
outside temperature is low and sunlight is
absent. When adjusting the temperature
control switch between Cold (blue) and
Hot (red), warm airflow will enter bottom
area of the vehicle while cold air and
normal temperature airflow will enter top
space.
A/C switch: ON or OFF
Internal/external recirculation switch:
external recirculation ( working
indicator light goes out)
Airflow distributing switch: ( )
Cold air/warm air adjusting switch:
Between blue (Cold) and red (Hot).
Blower switch: random
Ventilation
The air outside the vehicle will flow in
through central air vents and side air vents.
A/C switch: OFF
Internal/external recirculation switch:
external recirculation ( working
indicator light goes out)
Airflow distributing switch: ( ) or
( )
Cold air/warm air adjusting switch: blue
Blower switch: random
Forced heating
A/C switch: OFF
Internal/external recirculation switch:
internal recirculation ( working
indicator light lights)
Airflow distributing switch: ( )
Cold air/warm air adjusting switch: turn it
clockwise to bottom.
Blower switch: maximum revolution
Normal heating
A/C switch: OFF
Do not use “Forced Heating”
long so as to avoid inside air becoming
foul and generation of fog on windows.
In case fog is generated on any window
or the window becomes wet, turn off the
internal recirculation switch. “Forced
Heating” only applies to quick heating,
and then it should be dialed back to
“Normal Heating” as soon as possible.
To Next Page
Loading...
