Safety
The first row of figures on LCD display screen are indications of gear positions which displays current gear of a vehicle with automatic
transmission; the gear positions displayed are P, R, N, D, 1, 2, 3, 4. For a vehicle with manual transmission, this function is unavailable.
The second row of figures on LCD display screen is used to display symbols of time and clock and subtotal of kilometrage. The positions of
time and subtotal of kilometrage can swap each other. Time is displayed in 24 hour system.
The third row of figures on LCD display screen is used to display accumulated kilometrage.
The fourth row of figures on LCD display screen is used to display fuel consumption per 100km. Indicating range:
0.1L/100km~99.9L/100km; the value displayed will be updated once every 10s. When the engine does not run (the instrument does not
receive fuel consumption signal), no figure will be displayed; when the engine is running but the vehicle does not travel, “-L/100km” will be
displayed.
To Next Page
Loading...
Need help?
General
