Safety
Display switch method among subtotal of kilometrage/instantaneous fuel
consumption/average fuel consumption/clock
By inching (<0.3s) the clock mode lever on instrument of the vehicle, you can switch display among subtotal of kilometrage/instantaneous
fuel consumption/average fuel consumption/clock; under the state of subtotal of kilometrage, pressing the lever and hold long (>2s) can
clear the subtotal of kilometrage.
Clock adjusting method
By inching (<0.3s) the clock adjusting lever on instrument of the vehicle, you can adjust right part on LCD display screen to clock display
state; at this time, press clock adjusting button long and hold for about 5s and the hour bit of the digital display clock will frequently flash;
by inching the clock adjusting lever, hour bit of clock can be adjusted; for each press, the digital display will increase 1 hour and it will
automatically increase when the lever is pressed and held long. After hour bit has been properly adjusted, wait for about 5s and the minute
bit of the digital display clock will automatically flash; at this time, by inching the clock adjusting button, minute bit of the clock can be
adjusted; for each press, the digital display will increase 1 minute and it will automatically increase when the button is pressed and held
long.
After time of the clock has been properly adjusted, wait for several seconds and the digital display will not flash any longer, which indicates
that the time has been properly adjusted.
To Next Page
Loading...
Need help?
General
