Adjust the balance
1. Press the SEL button to select the ―BAL‖.
2. Turn this button in the clockwise direction to increase the volume of right speaker; and turn the button in the anticlockwise
direction to increase the volume of left speaker.
*Its value is set as ―0‖ prior to leaving factory.
3. After the completion of adjustment, press the SEL button for a long time to fulfill the setting.
Adjust the fade
1. Press the SEL button to select the ―FAD‖.
2. Turn this button in the clockwise direction to increase the volume of front speaker; and turn the button in the anticlockwise
direction to increase the volume of rear speaker.
*Its value is set as ―0‖ prior to leaving factory.
3. After the completion of adjustment, press the SEL button for a long time to fulfill the setting.
Loudness function
The loudness effect adds the woofer and bass to create the natural tone. This function is automatic.
To Next Page
Loading...
