to its original position after the
disassembly of the snow tire chain.
Train belt
The train belt is one of the parts subject
to the most severe stress. So, the belt
must be of high quality and reliable to
meet operational needs.
When replacing the belt, choosing a belt
with the same dimension only cannot
meet the requirement. For the sake of
safety, please use CHERY’s original belt
ONLY. The genuine spare belt is
available in any CHERY Authorized
Service Station.
NOTICE:
A train belt may extend after a period of
use, and the belt will be loose when the
extension reaches a certain level, which
will result an accident and damage your
vehicle. So, the tension of the generator
belt must be checked once after the
mileage of 1,000 KM.
Check the tension of driving belt
1. Turn off the ignition switch and
draw out the key.
2. Press the middle part of the belt
with your thumb (with the force of
approx. 100N) to check the
flexibility of the belt:
Max allowable flexibility: 10 mm.
3. If the flexibility exceeds the
allowable value, please
immediately get to the CHERY
Authorized Service Station to make
it regulated.
Vehicle washing
DO NOT throw the cleaning materials
into the domestic waster. Please utilize
the local waste treatment facilities
qualified.
Use the vehicle cleaning area
that doesn’t damage the
ecological drainage system ONLY. Using
the clean water is the most important
factor to protect the vehicle’s paintwork.
The cold or slightly warm water
is available only to clean your
vehicle.
To Next Page
Loading...
