Method to refill the coolant into an
auxiliary radiator: In case of the
engine’s cold state and standstill,
pull upwards and open the auxiliary
radiator filler cap. The capacity of
coolant refilled must exceed the
MIN mark and below the MAN
mark.
Regularly observe the capacity of
coolant in the auxiliary radiator.
Refill the coolant in time if below
the MIN mark.
The coolant level can be checked through
the semi-transparent auxiliary radiator.
When the engine is in the cold state, the
coolant level shall be between the MIN
and MAX marks.
If it is necessary to refill the coolant
when the engine is hot, wait for 10
minutes first to cool the engine. Loosen
the filler cap one quarter turn to release
the pressure. Wait for a period of time,
and then fully open the cap to refill the
coolant which conforms to the
specifications of this vehicle.
Using the coolant with the proper
concentration can’t only protect the
engine free from be frozen in winter, but
also provide the corrossion protection all
the year around. Now, the engine can
operate under very high temperature but
the bad coolant can’t provide the cooling
system the proper corrosion protection.
So, please use the coolant conforming to
the CHERY’s specifications. DO NOT
substitute the coolant with the main
water.
See the ―Capacity and Specification
Parameters‖ for the capacity of coolant
to be freilled.
This coolant is a noxious
fluid which can’t be used to
wash your hands or clothes.
Pay more attention to the coolant when
refilling and avoid that the coolant
sprays on any position of the engine. If
the fluid contacts your skin or eye(s)
by accident, please wash the affected
position and immediately go to see a
doctor.
To Next Page
Loading...
