Driving
42
Hand brake
After parking, tighten the hand brake
upwards to prevent the car from sliding
due to lapse of attention.
When applying hand brake with the
ignition switch turned on, the brake
alarm lamp will light.
Pull up the hand lever to use the hand
brake.
To release the hand brake, pull up the
hand lever slightly, press down the
release button at the end of the handle
and simply push it down.
The hand brake applies action on the
rear wheel. Applying the brake pedal
while pulling up the hand brake can
facilitate the hand brake’s pulling up.
Gearshift
Methods and attentions for
use/operation:
When shifting gear, completely
apply the clutch pedal and rapidly
control the gearshift lever to shift
gear after the driver has detached
2. Turn the steering wheel to
round the barrier. No matter how
fierce the braking is, you can
maintain control performance
when turning.