There are an adjusting knob and an
adjusting handle at the outside of
driver-side seat cushion, and its specific
functions are as follows:
Knob: suitable for adjusting the lifting of
seat cushion.
Turn the knob by hand in the
clockwise direction to lift up the
cushion while turn the knob in the
anticlockwise direction to fall down
the cushion.
Handle: applicable to adjust the
inclination angle of seat backrest.
Pull upwards the handle to change
the inclination angle of seat
backrest. Adjust the backrest to the
your desired angle, and then place
down the handle seat to secure the
seat backrest.
Adjustment of front
passenger-side seat
Adjust the inclination angle of
front seat backrest
Please enable your body to contact the
seat backrest, and then pull the
adjusting handle of right backrest of the
seat. Change the inclination angle of your
body to adjust the backrest to your
desired angle. (The adjusting handle of
driver’s seat backrest is located at the left
side of seat.)
Adjust the forward and
backward sliding of seat
As shown in the figure below, pull
upwards the adjusting lever located at the
outside front edge of seat to move the
If the seat is adjusted during
driving, it may result that
the vehicle is out of control.
So, the seat can be adjusted only when
the vehicle stops.
To Next Page
Loading...
