Chery S18D Service Manual
3.5. Remove the two fixing screws of pillar B lower
panel with cross screwdriver (each one for
front and rear), remove the pillar B lower
panel.
3.6. Remove the pillar B upper panel.
3.7. Remove the seat belt retractor assembly with
17# socket wrench.
Torque: 50±10N.m
3.8. Remove the seat belt guide plate with cross
screwdriver.
3.9. Remove the seat belt upper fixing point bolt
with 17# socket wrench.
Torque: 50±10N.m
3.10. Installation Procedure
The installation procedures are reverse to those for removal.
9
To Next Page
Loading...
