Chery S18D Service Manual
Chapter IV Removal, Installation & Maintenance of Front/Rear
Bumper
I. Removal, Installation & Maintenance of Front Bumper
1. Preparations
Socket wrench, cross screwdriver, slotted screwdriver, plastic screwdriver.
Parts: expansion bolt.
2. Precautions
2.1. Wear necessary appliance for labor protection to prevent from accidents.
2.2. Try to avoid scratching the paint of the bumper during the removal operation.
3. Removal Procedure
3.1. Open the Engine hood.
3.2. Remove the fixing screws on upper of front
bumper with cross screwdriver.
3.3. Remove the bumper lower fixing screw with
cross screwdriver and 7# socket wrench.
3.4. Remove the fixing screw that connects the
front bumper and fender with 7# socket
wrench.
26
To Next Page
Loading...
