Chery S18D - Installation Procedure; Removal and Installation of Carpet; Preparations; Removal Procedure

Chery S18D Service Manual
2.3. Use cross screwdriver to remove the rear
fixing screws of the central console assembly
and cup holder lower fixing screws.
2.4. Use plastic screwdriver to pry open the
gearshift handle cover and rotate the gearshift
handle in anti-clockwise direction to remove it.
2.5. Lift up the rear part of center console and pull
the rear part to remove the center console.
3. Installation Procedure
The installation procedures are reverse to those for removal.
IV. Removal and Installation of Carpet
1. Preparations
Tools: slotted screwdriver, cross screwdriver; socket wrench and etc.
2. Removal Procedure
2.1. Remove the seats. (Refer the removal of
seat)
14