Chery S18D - Removal and Installation of Blower Speed Regulation Module; Removal and Installation of Heater Exchanger

Chery S18D Service Manual
The installation procedures are reverse to those
for removal.
3. Removal and Installation of Blower Speed Regulation Module
3.1. Removal Procedure
3.1.1. Pull out the speed regulation module
connector.
3.1.2. Use a cross screwdriver to remove the
fixing screws on speed regulation
module.
3.1.3. Pull out the speed regulation module.
3.2. Installation Procedure
The installation procedures are reverse to those
for removal.
4. Removal and Installation of Heater Exchanger
4.1. Removal Procedure
4.1.1. Disassemble the evaporator assembly. (See Removal of Evaporator Assembly)
4.1.2. Disassemble the air-conditioner harness. (See Removal of Instrument Panel Cross Beam)
51