Chery S18D - Removal of Rear Wiper Nozzle

Chery S18D Service Manual
4.1.1. Screw off the two fixing bolts of lock
cylinder with 10# socket wrench.
Installation torque: 7±1N.m
4.1.2. Push the lock cylinder out and remove it.
Note: the lock cylinder washer shall not be
throwed away.
4.2. Installation Procedure
The installation procedures are reverse to those
for removal.
Note: the clearance between the lock cylinder and
door sheet metal.
5. Removal of Rear Wiper Nozzle
5.1. Removal Procedure
5.1.1. Remove the fixing bolt of high mount
brake lamp cover with a 10# socket
wrench.
5.1.2. Remove the cover and disconnect the
connector; remove the high mount brake
lamp.
5