Chery S18D - Installation of Evaporator Assembly; Removal and Installation of Evaporator Interior; Preparation of Tools; Removal and Installation of Blower

Chery S18D Service Manual
2.7. Take the evaporator assembly out of the
driver’s cab.
3. Installation of Evaporator Assembly
The installation procedures are reverse to those for removal.
III. Removal and Installation of Evaporator Interior
1. Preparation of Tools
Cross screwdriver, slotted screwdriver, inner spline wrench and etc.
2. Removal and Installation of Blower
2.1. Removal Procedure
2.1.1. Remove the blower motor and relay
module connector.
2.1.2. Push down the clip and rotate the blower
clockwise to remove it.
2.2. Installation Procedure
50