R410A50Hz Universal Outdoor Series Technical Manual Control
GD Chigo Heating & Ventilation Equipment Co., Ltd.
1.Wireless Remote Controller
1.1 Jingling Commer
USE OF REMOTE CONTROLLER
The controller below is the Jingling Common Remote Controller, SWING key, TURBO key, LAMP key
and CLEAN key is applicable for special latest developed new models instead of normal ones.
FUNCTION KEY
A. ON/OFF key:
Press the key and the remote control will switch circularly in the order: ON→OFF→ON. When it is
powered on at first from off state to on state, the default setting of work condition is ( The set
temperature is 25℃ and the mode , wind speed, swing and air door are all automatic and there is
no lamp, no turbo, no purification, no sleep, no timing and no hold function ). When it is not
powered on firstly from off state to on state, the work condition is as the same as the state before
stopping. It will cancel damp, purification, sleep, turbo and timing running mode.
To Next Page
Loading...
Need help?
General
