CHIYU TECHNOLOGY CO., LTD.
No.28, Renai Rd., Chiayi, 600, Taiwan Tel：(886) 5-2835460 Fax：(886) 5-2835458
BF-480M User’s Guide
- 10 -
Step 4：Double-click “Protocol” in the Select Network Component Type or highlight “Protocol” then click
“Add”.
Step 5：Highlight “Microsoft” under the list of manufacturers. Double-click “TCP/IP” from the list on the right
or highlight “TCP/IP” then click “OK” to install TCP/IP.
Step 6： After a few seconds, you will be returned to the Network window. The TCP/IP Protocol should now be
on the list of installed network components (see 3 above).
2.3.2 Fixed IP Addresses Configuration
For Windows 98 and Millennium
Step 1：To set up computers with fixed IP Addresses, click the “Properties” button. The TCP/IP Properties
window consists of several tabs. Choose the “IP Address” tab as shown below.
Step 2：Select “Specify an IP address” and enter “192.168.0.xxx” (the default value of BF-2300 is
192.168.0.125) in the “IP Address” location (where xxx is a number between 1 and 254 used by the
High-Performance BF-2300 to identify each computer), and the default “Subnet Mask” “255.255.255.0”. Note
that no two computers on the same LAN can have the same IP address.
To Next Page
Loading...
Need help?
General