What to do if none of the LEDs turn on when I turn on the Chiyu Technology BF-2300 Controller?
First, ensure the BF-2300 Controller is properly connected to a suitable power source. Verify all cable connections. If the LEDs remain off, it might indicate a hardware issue, and you should contact your local vendor.
How to fix 'Can not access BF-2300 Chiyu Technology Controller from Ethernet' error?
Check the Ethernet cable connection between your BF-2300 Controller and your computer or hub. Ping the BF-2300 from your computer to test the connection. Also, ensure your computer's Ethernet card is correctly installed and functioning.
General| Power Supply | 12VDC |
|---|---|
| Input Voltage | 12VDC |
| Storage Temperature | -20°C to 70°C |
| Communication | TCP/IP, RS-485 |
| Door Control | 2 doors |
| Output Voltage | 12VDC |
| Humidity | 10% to 90% (non-condensing) |
| Card Capacity | 30, 000 cards |
Introduces the BF-2300 I/O controller and its capabilities for industrial device monitoring and control via Ethernet.
Lists package contents, optional accessories, and key features of the BF-2300 controller.
Illustrates typical applications of the BF-2300 through a network diagram.
Details hardware components, I/O channels, and their specifications.
Covers Ethernet, Serial, Configuration, and Power & Environment specifications.
Shows the physical connections and ports of the BF-2300 device.
Explains the meaning of different LED indicators (Power, Ethernet, Transaction, RS232, RS485) and their states.
Guides on setting up the computer with a static IP address to communicate with the BF-2300.
Provides step-by-step instructions for checking and installing the TCP/IP protocol on a Windows PC.
Details how to configure fixed IP addresses for Windows 98/Millennium and XP/2000.
Guides on accessing and configuring the BF-2300 via its web browser interface.
Explains how to configure network settings, including Static IP, DHCP, and PPPoE connection types.
Details the three operation modes: TCP Server, TCP Client, and UDP.
Covers the configuration options for serial communication modes, RS232 and RS485.
Configures the device for automatic reporting of I/O status via Ethernet, RS232, or RS485.
Sets up email alerts for alarm triggers, requiring SMTP server and recipient details.
Configures Dynamic DNS services (DynDNS.org, TZO.com) to map a dynamic IP address to a hostname.
Manages device settings, including HTTP port blocking, management IP, host name, and administrator password.
Displays current system status, firmware version, IP configuration, and network statistics.
Allows saving and retrieving device configuration settings for backup and restoration purposes.
Provides instructions for updating the BF-2300 device's firmware to the latest version.
Tests network connectivity to the BF-2300 from LAN or Internet using the Ping utility.
Addresses common problems like LEDs not turning on, access failures, and ping issues.
Defines the structure of command and return packets for Digital I/O operations.
Details commands for reading, triggering, and reporting Digital I/O states.
Describes the functions of the hardware reset button based on its mode and action.
Provides a step-by-step guide for registering a Dynamic DNS service with Dyndns.org.
Guides on registering a Dynamic DNS service with TZO.com.
Defines terms like 10BaseT, Adapter, Browser, Cable Modem, Ethernet, etc.
Defines terms like DDNS, DHCP, DNS, Firmware, Gateway, HTTP, IP Address, etc.
Defines terms like MAC Address, Mbps, Ping, Port, PPPoE, Subnet Mask, TCP/IP, etc.
Defines terms like TCP, Telnet, TFTP, and Static IP Address.
Guides on finding the MAC and IP addresses of your computer's Ethernet adapter using command prompt.
To Next Page