CHIYU TECHNOLOGY CO., LTD.
No.28, Renai Rd., Chiayi, 600, Taiwan Tel：(886) 5-2835460 Fax：(886) 5-2835458
BF-480M User’s Guide
- 18 -
TCP Client
Destination IP Address1&Port
Setting Factory Default Necessity
E.g., 192.168.0.1 None Required
0 to 65535 50000 Required
Destination IP Address23/4&Port
Setting Factory Default Necessity
E.g., 192.168.0.1 None Optional
0 to 65535 None Optional
If your device is acted as active to report real-time status to remote and the data be guaranteed to be received
by peer is your concern, then you can set BF-2300 as TCP Client. Be sure the value of item Port is same as
your remote control application using and set the correct value of Destination IP Address.
Keep Alive Check
Setting Factory Default Necessity
Disable/Enable Disable Required
Disable: Disable the check of TCP connection is still alive or not.
Enable: BF-2300 automatically send a Ping request to peer per each 30 seconds, the TCP connection will be
terminated if no response of Ping reply from peer.
To Next Page
Loading...
Need help?
General