Section 4
Maintenance
013-100199-04 4-1
The projector is an international regulatory agency approved product designed for safe
and reliable operation. To assure complete safety at all times it is important to
acknowledge the following precautions while operating the projector.
WARNING
Always power down the projector using appropriate procedure
and disconnect all power sources before cleaning or servicing.
WARNING
Always remove the lens when shipping the projector.
WARNING
NEVER look directly into the projector lens.
The high brightness of this projector
could cause permanent eye damage.
WARNING
For protection from ultraviolet radiation,
keep all projector shielding intact during operation.
CAUTION
Qualified personnel should perform installation ONLY.
Observe and follow all warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle alerts the user to
important operating and maintenance (servicing) instructions in the
literature accompanying the projector.
The lightning flash and arrowhead symbol within the equilateral triangle
alerts the user to uninsulated “dangerous voltage” within the projector’s
enclosure that may be of sufficient magnitude to constitute a risk of
electric shock.
Read all operating instructions prior to using the projector.
Operate the projector in an environment, which meets the operating range specified in
Section 6 – Specifications.
4.1 Warnings and
Safety
Guidelines
Labels and Markin
s f
Instructions f
Pro
ector Location f
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
