Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or damage
to the instrument, the operator must refer to an explanation in
the instruction manual.
High temperature: This symbol indicates the temperature is
now higher than the acceptable range of human. Do not
touch it to avoid any personal injury.
Protective grounding terminal: To protect against electrical
shock in case of a fault. This symbol indicates that the
terminal must be connected to ground before operation of
equipment.
WARNING
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly
performed or adhered to, could result in personal injury. Do
not proceed beyond a WARNING sign until the indicated
conditions are fully understood and met.
CAUTION
The CAUTION sign denotes a hazard. It may result in
personal injury or death if not noticed timely. It calls
attention to procedures, practices and conditions.
The Notice sign denotes important information in procedures,
applications or the areas that require special attention. Be
sure to read it carefully.
vii
To Next Page
Loading...
