Need help?Do you have a question about the Chroma 19073 and is the answer not in the manual?
General| Model | 19073 |
|---|---|
| Category | Test Equipment |
| Output Frequency | 50Hz/60Hz |
| Power Rating | 500VA |
| AC Test Voltage | 5 kVAC |
| DC Test Voltage | 6kV |
| IR Test Voltage | 50 V to 1 kV |
| Interface | RS-232, USB |
| Insulation Resistance | 1MΩ to 50GΩ |
| Type | Electrical Safety Tester |
Verify power settings before initial power-up.
Ensure proper grounding to prevent electric shock.
Warnings and precautions for high voltage operation.
Explanation of controls and displays on the front panel.
Description of connectors and controls on the rear panel.
Detailed guidance on using instrument functions.
Step-by-step guide for conducting various tests.
Safety and procedural guidelines for instrument setup.
Procedures for handling emergencies like electric shock.
Guidance on identifying and resolving common issues.
Steps for calibrating voltage measurements.
Steps for calibrating current measurements.
Procedure for calibrating ARC detection.
Steps for calibrating insulation resistance measurements.
To Next Page
