Chroma 19073 - 1 Introduction; An Overview of Function

HIPOT Tester 19071/19072/19073 Quick Start Guide
1
1. Introduction
1.1 An Overview of Function
■ This high quality automatic HiPot test instrument is designed to test the
withstanding leakage current and insulation resistance for electric
machinery and electronic devices.
■ For withstanding test, its output power is AC: 100VA (5kV, 20mA), DC:
30VA (6KV, 5mA), which is applicable to electronic, electric machinery
and components for withstanding and insulation tests.
■ For insulation resistance, its test range is from 0.1MΩ~50GΩ, and test
voltage is 0.050kV ~1kV definable.
■ For ground continue, its test range is from 0Ω∼5Ω.
■ For short/open detection, before testing high voltage test if the
capacitance is short or open circuit in advance. For ensure the DUT is
good contact then to perform high voltage test.
■ All settings for state, time, current, voltage and resistance can be seen
clearly on the display. There is no need to memorize the parameter
state of any items.
■ It is equipped with devices for Pass/Fail judgment, test results and
remote control.
■ It can perform high efficiency and accurate tests for electric machinery,
electronic devices and components.