Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or
damage to the instrument, the operator must refer to
an explanation in the instruction manual.
Protective grounding terminal: To protect against
electrical shock in case of a fault. This symbol
indicates that the terminal must be connected to
ground before operation of equipment.
WARNING
The WARNING sign denotes a hazard. It calls
attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result
in personal injury. Do not proceed beyond a
WARNING sign until the indicated conditions are
fully understood and met.
CAUTION
The CAUTION sign denotes a hazard. It may
result in personal injury or death if not noticed
timely. It calls attention to procedures, practices
and conditions.
This indicates important information or tips for the
procedures and applications, etc. The contents
should be read carefully.
vii
To Next Page
Loading...
