HIPOT Tester 19071/19072/19073 Quick Start Guide
24
should be connected together.
y Add anti-interference iron core to the high voltage cable and the 2
ends (device output and DUT) of RTN/LOW test cable with
winding at least 1 circle.
y The high voltage and RTN/LOW test cable must be separate from
the control cable.
y The high voltage and RTN/LOW test cable must keep proper
distance from the tester panel.
3.2 Notices for Maintenance
Except notified in the manual there is no items can be maintained by user
in this device.
Please contact Chroma or sales agent when any abnormal condition occurs
in this device. Do not perform maintenance by yourself to avoid causing
any unnecessary hazards that may damage the device.
3.3 Troubleshooting
Besides replacing the fuse (see 3.1.3 Solving Problems) or other notified in
the manual, there is no troubleshooting to be performed by user.
Please contact Chroma or sales agent when any abnormal condition occurs
in this device. Do not perform maintenance by yourself to avoid causing
any unnecessary hazards that may damage the device.
To Next Page
Loading...
