HIPOT Tester 19071/19072/19073 Quick Start Guide
4
Operable range Maximum relative humidity 80% for
temperature up to 31°C (88°F).
Decreasing linearly to 50% relative
humidity at 40°C (104°F)
Altitude up to 2000m
Indoor use only.
Pollution degree 2
Storage range
-10 to 60°C (-14 to 140°F), ≤ 80% RH.
Installation Category CAT II
Power Requirement
Line Voltage AC 100V, 120V, 220V ± 10%, 240V +5 -
10%
Frequency 50 or 60 Hz
Power No load: < 60W
Consumption With rated load: 300W max.
General
Dimension 270(W) x 105(H) x 350(D) mm
Weight Approx 12kg
Safety
Ground Bond
Less than 100mΩ at 25Amp, 3sec
Hipot Less than 10mA at 1.5kVac, 3sec
Insulation Resistance
Over 100MΩ at 500V 3sec
Line leakage current Less than 3.5mA at 127V, 3sec, normal,
reverse
Note 1: AC set over 75VA, DC set over 22.5VA the maximum operating time
is 60 seconds, and the same as rest time.
The period of rest time is 1/2 duty of operating time. For full rating
output, the line input range is +10% ∼ -0%.
Note 2: Only refer to 1.2kV resistance load.
Note 3: IR test time is 0.3 sec ~ 999 sec.
Note 4: Display resistance range is up to 60GΩ.
1.3 Standard Accessory
Item Q’ty Description
USA-type power
cord
1
90° elbow USA-type power cord, length 1.8m
To Next Page
Loading...
