Chroma 6460 - Page 11

ix
Revision History
The following lists the additions, deletions and modifications in this manual at each revision.
Date
Version
Revised Sections
May 1998
1.0
Complete this manual
May 2005
1.1
Change the address and phone number of Chroma
Dec. 2007
1.2
Add the following
- “Material Contents Declaration”
- NOTICE in the section of “The Setting of Output Relay”.
Modify the following
- the Accuracy of Voltage, Current and Power Factor of INPUT
RATINGS and Range(peak) of Current/phase in the section of
“Specifications”.
- Max. Current in the section of “Ratings”.
- Figure 2-2-a-d and Table 2-1 in the section of “Output
Connection”.
Del NOTICE in the section of “Remote Sense”.
Mar. 2008
1.3
Interchange the section of “Remote Sense” and “External
Reference”.
Oct. 2008
1.4
Add the chapter of “Appendix B Pin Assignment of TTL I/O”.
Modify the following:
- the description of “B. Input/Output” in the section of “Key
Features”.
- the figure and description in the section of “The Rear Panel”.
- the description in the section of “Ratings”.
- the figures in the sections of “The Setting of Configuration” & “
The
Setting of Setup”.
- “Hardware Protection Table List” in the section of “Protection”.
- the description in the section of “Common Command Dictionary”.
- the description in the section of “Instrument Command
Dictionary”.
- the description in the section of “Command Summary”.
Jul. 2014
1.5
Modify the following sections:
- “CE Declaration”
- the description of “Input Ratings” in the section of “Specifications”
.
- “Figure 1-1, 1-2 and Table 1-2” in the section of “Names of Parts”
.
- “Input Voltage Range description and Figure 2-1”
in the section of
“Requirements of Input Power”.
-
“Figure 2-2” in the section “Output Connection”.
Oct. 2015
1.6
Delete the word of “remote inhibit” in the manual.