4. Arrow Buttons — Push the arrow buttons to highlight an item or scroll
through menus.
5. Fast Forward Button
— Push and hold to fast forward through the current audio track
or video chapter. Push once to skip to the next track.
6. Play/Pause Button
|| — Begin/resume or pause disc play.
7. Fast Rewind Button
— Push and hold to fast rewind through the current audio track
or video chapter. Push once to revert back to the previous track.
8. OK Button — Push to select the highlighted option in a menu.
9. Screen Selector Button — Push the screen selector to toggle between screen 1 (Driver Side),
or screen 2 (Passenger Side).
10. Back Button — Push to exit out of menus or return to previous screen.
11. Power Button — Turns the screen and wireless headphone transmitter for the selected
Channel on or off.
12. Screen Indicator — Indicates which screen (1 or 2) is being controlled by the remote control
when a button is pushed.
Pairing The Remote
If the remote needs to be paired to your Uconnect Theater system, follow the procedure below:
1. Press the “Settings”
icon on the touchscreen.
2. Press the “Remote” button on the touchscreen in the settings menu.
3. Select “Pair Remote” and follow the on screen instructions to complete the pairing process.
NOTE:
• There will be a touchscreen notification message when pairing is successful/unsuccessful.
Repeat the above steps to pair the second remote.
• If remote is ever non-operational, try pairing remote.
• The system can accommodate up to 10 paired remote controls.
Replacing The Remote Control Batteries
Each remote control requires two AAA batteries for operation.
NOTE:
Perchlorate Material — special handling may apply. Visit
dtsc.ca.gov/hazardouswaste/perchlorate
To replace the batteries:
1. Locate the battery compartment on the back of the remote, then slide the battery cover
downward.
2. Remove the old batteries and follow battery recycling procedures for your area.
3. Install new batteries, making sure to orient them according to the polarity diagram shown
inside the battery compartment.
4. Replace the battery compartment cover.
ELECTRONICS
149
To Next Page
Loading...
