EasyManua.ls Logo

Chrysler 2017 Pacifica - Multifunction Lever

Chrysler 2017 Pacifica
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MULTIFUNCTION LEVER
The multifunction lever is located on the left
side of the steering column. The multifunction
lever controls the turn signals, headlight beams
and flash-to-pass functions.
Turn Signals
Move the multifunction lever up or down and
the arrows on each side of the instrument clus-
ter flash to show proper operation of the front
and rear turn signal lights.
NOTE:
If either light remains on and does not flash, or
there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light
when the lever is moved, it would suggest that the indicator bulb is defective.
Turn Signal Warning
If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about
1 mile (1.6 km) with the turn signals on, a chime will sound and a message will display in the cluster
to alert the driver.
Lane Change Assist If Equipped
Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or
left) will flash three times then automatically turn off.
High/Low Beam Switch
When the headlights are turned on, pushing the multifunction lever toward the instrument panel
will switch from low beams to high beams. Pulling back to the neutral position returns the
headlights to the low beam operation.
Multifunction Lever
OPERATING YOUR VEHICLE
61

Table of Contents

Other manuals for Chrysler 2017 Pacifica

Related product manuals