KEYLESS ENTER-N-GO — PASSIVE ENTRY
The Keyless Enter-N-Go system is an enhancement to the vehicle’s Remote Keyless Entry (RKE)
feature. This feature allows you to lock and unlock the vehicle's door(s) and liftgate without
having to push the RKE Key Fob LOCK or UNLOCK buttons, as well as starting and stopping
the vehicle with the push of a button.
To Unlock From The Driver or Passenger Side
With a valid RKE Key Fob located outside the
vehicle and within 5 ft (1.5 m) of the driver or
passenger side door handle, grab either front
door handle to unlock the door automatically.
To Lock The Vehicle
The passive entry front door and sliding door handles have buttons located on the outside of the
handle. With one of the vehicles RKE Key Fobs located outside the vehicle and within 5 ft (1.5 m)
of the driver's (front and sliding door) or passenger (front and sliding door) handles, push the
door handle button to lock all four doors and liftgate.
NOTE:
The passive entry system my be programed through Uconnect Setting to meet your needs.
Refer to “Uconnect Customer Programmable Features” for further information.
Grab The Door Handle To Unlock
GETTING STARTED
18
To Next Page
